abs plastic _ Gary trade (certified)

Gary Ltd. of Shenzhen City

Product Categories

Friendly Links

home > Supply > abs plastic _ Gary trade (certified) _ Yangjiang abs

abs plastic _ Gary trade (certified) _ Yangjiang abs

Information Name:	abs plastic _ Gary trade (certified) _ Yangjiang abs
Published:	2015-04-25
Validity:	0
Specifications:	Limited
Quantity:
Price Description:
Detailed Product Description：	Fine point gate nozzle mold common point gate abs system, point gate nozzle for fine mold. When the appearance of the gate does not allow a clear traces of products is relatively large, the structure is more complex gate usually point the way into the plastic. Advantages: automatic gates and products at the top of the separation process; selecting gate location is more flexible, small gate mark; small stress generated gate premises. Cons: not easy to process the gate; in two plate mold mold can not be used in this way; requires the use of a larger injection pressure. Elongated-shaped retaining ring when the height dimension larger plate, if the positioning ring with ordinary, the larger the gate length of the liner, cause the injection molding process of the primary channel through the shunt channel length greater pressure losses. Therefore, you should consider using a mold shaped retaining ring lengthened. Determine the size of the mold mold width 0 and width dimensions Jen mold ejector plate width dimension? The size should be fairly abs-130, a difference between the distance should. In the standard mold, the ejector plate width and mold core width into correspondence. Determine the length of the mold size, mold core length dimension away from the border to return to the outside diameter of the needle between the sides should be greater than 8, for the above mold is best to take in order to ensure the strength of the mold. Determine the height of mold, mold mainly refers to the height of eight boards, eight boards and side rail height, thickness between other templates are standard parts, usually without the need for adjustments. In order to determine the parameters of a schematic diagram of the mold frame height. Eight board height: There panel mold, generally equal to the depth of six panels open box plus 20; no panel series mold, generally equal to the depth of the opening frame plus. 8 board height: generally equal to 8 board open frame depth plus; if the dynamic model Jen opened the box, you need to add support plate

Admin>>>
You are the 10300 visitor
Copyright © GuangDong ICP No. 10089450, Gary Ltd. of Shenzhen City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility