Direct-gate apply to exterior surfaces and allowed to gate remain shallow and flat products abs-223, due to shrinkage, stress and other reasons, easily lead to warpage. Rectangular side gate rectangular mold outlet side gate is large the most used way. Shows a typical side gate. Advantages: side gate shape is simple, easy processing, easy to remove the gate. Disadvantages: The products will leave the side gate vestige abs plastic, products and the gate can not be automatically separated. Plastic materials for different abs, the relevant parameters are not the same gate. In the design process, the user requires a combination of materials, the mold size, and position of the flow and other factors considered. Fine point gate nozzle mold common point gate, point gate nozzle for fine mold. When the appearance of the gate does not allow a clear traces of products is relatively large, the structure is more complex gate usually point the way into the plastic. Advantages: automatic gates and products at the top of the separation process; selecting gate location is more flexible, small gate mark; small stress generated gate premises. Cons: not easy to process the gate; in two plate mold mold can not be used in this way; requires the use of a larger injection pressure. Elongated plate-shaped retaining ring when the height dimension is large, if common retaining ring abs, the greater the length of the gate bushing, in the injection molding process makes the length of the primary channel through the shunt path is large, a large pressure loss . Therefore, you should consider using a mold shaped retaining ring lengthened. abs | Sakata abs | Gary Paffett trade provided by the Shenzhen Municipal Trade Limited. Shenzhen Gary Ltd. (www.pft-trading.com) strong, credible, in Shenzhen, Guangdong engineering plastics industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Paffett trade and you hand into the brilliant, for a better future!